ELEMENTSADVANCEDSave these instructions for future referenceADVANCED ELEMENTS, INC. 2005IMPORTANT!BEFORE PROCEEDINGREAD THIS MANUAL CAREFULLY1 Person
To repair pinholes:1.Inflate the PVC tube. Locate the pinhole by sponging soapy water over the tube until you see air bubbles. Mark the location
LIMITED WARRANTYAdvanced Elements, Inc. warrants this product to be free from defects in material or workmanship for a period of one year from the dat
WARRANTY REGISTRATION CARDMail to: Advanced Elements, Inc. P.O. Box 5128, Concord, CA 94524 Attn: warranty department. PLEASE COMPLETETHE OTHER SIDE O
OWNER'S INFORMATION PACKET1. CAUTION - SAFETY WARNING2. ASSEMBLY / INFLATING INSTRUCTIONS3. GUIDELINES FOR USAGE4. PROPER CARE AND STORAGE5. REPA
Users of this product agree by their use to accept the inherent risks involved in this paddlesports activity and agree to follow all instructions, cau
2. Assembly / Inflating InstructionsThe illustration below shows the general assembly of the kayak, with optional thigh straps (sold separately)..You
To begin inflating your kayak, you will need a Bellows Foot Pump (FAQ) or a Double Action Hand Pump (FAQ) and your Valve Adaptor (FAQ). The Valve Ada
3. Locate chambers 3 and 4 “floor.” Make sure valve body is screwed in tightly. Remove small cap (fig. 3) and insert Floor Valve Adaptor (fig. 4). I
3. Guidelines for UsagePaddle sports can be very dangerous and physically demanding. The user of this product should understand that participation i
Do not store your kayak for an extended period of time while wet. Follow these steps for removing excess water.1 Unzip the zippers that run down the
2. Fold in half, down the center, lengthwise.3. Fold into 3 equal sections.4. Place into duffel bag.5. Repairs / Design and MaterialAll kayaks come w
Comments to this Manuals